Showing posts with label hand stitch. Show all posts
Showing posts with label hand stitch. Show all posts

Sunday, 6 May 2018

April samples

18/14 Lichen
I've been studying the lichens on our shore - the more you look, the more you find, and the closer you get the more beautiful the colours and textures.

For my lichen sample I coloured a piece of Tyvek yellow quickly with Neocolour II, then sandwiched it in baking parchment and bubbled it with an iron. I free machined it onto a mustardy felt , just scribbling round the bubbles and craters to attach and define areas.
 
Then some crusty cable stitch, working from the back with variegated Anchor pearl cotton (1304) on the bobbin.

I was going to add some hand embroidery but in the end I decided it didn’t need any more.
 
18/15 Coltsfoot
This time of year is all about yellow – daffodils, celandines, primroses, gorse, coltsfoot. And it’s so welcome and sunny after the winter, even if yellow is actually one of my least favourite colours.
 
On a walk just along the coast at Ashaig, the dead grasses underfoot were studded with bright yellow flowers a bit like dandelions. Coltsfoot produces its flowers before its leaves, so they really stand out.
I made the flowers by free machine embroidery on soluble fabric, plus French knots for the centres. The background is assorted yarns free machined in a sandwich of soluble film.
 
18/16 Wind turbines
Wind turbine blades play a big part in life on south Skye at the moment. It’s not about where we get our electricity, it’s the hold ups and lack of parking caused by transport of the huge blades from the dock at Kyle, via Broadford airfield, to the wind farm project miles away on the mainland. It’s actually pretty amazing to watch these extreme loads being manoeuvred round the narrow roads and bridges – as long as you’re not in a rush to get anywhere! This week two ships full have been sitting just outside Kyle, in sight from our house, waiting to dock since the weekend.

I wanted clean, simple motifs so I decided to hand stitch my turbines on paper using fine machine embroidery thread. The centres are silver cup sequins. I do love the crispness of stitch on paper, and the visible perforations.
 
18/17 Great Northern Diver
Great Northern Divers (aka loons!) have been coming in close to the shore here recently. Beautiful birds, amazing patterns. Sample using FME on velvet.
 
 

Saturday, 23 December 2017

Limpets part 3 - more 3D forms

As promised, I’ve gone on to make limpet-inspired 3D… objects… made in the round instead of flat then seamed.
 
So it’s straight into free machining. If you machine stitch madly, round and round in a not-quite circular pattern, a flexible fabric should distort into a 3D cone.  
Yes! Well, not too bad… this first one’s rust felt, just free machined round and round from the centre in shaded rayon 30 Alcazar thread, then cut out.
And here’s a colony of them, domed FME on creamy felt. I like the extra colour-mixing of the coloured bobbin thread coming through, the bands would be too solid otherwise. Hmm, this is one to come back to…

So, how about the same method on dissolvable fabric? I give you – limpets made entirely of thread! It’s domed FME (as above) worked on Solufleece. I tried it first in a hoop, but couldn’t get a steep cone – that’s the big shallow one. Holding the fabric without a hoop worked better, but ouch, it’s tough on the fingers holding so tight. I used shiny off-white rayon 30 threads.
I really like these limpets, but they’re quite hard work - the stitching needs to be dense, to get the doming effect and to link the stitches without any structural support, so they turn out very stiff and difficult to decorate.

I also had a quick go at hand stitching 3D limpet cones – by partially gathering circles as you would for shibori. Trickier than it looks, and not a lot of fun.



Finally, I thought I’d try a couple of techniques from Jean Draper’s book, “Stitch and Structure”.

Coiling. Here I tried wrapping and coiling a cord to form  a shell shape. It’s sort of like making a coiled clay pot – only slower and trickier, IMHO. I used thick nylon cord and Coats Anchor multicolour pearl cotton thread. Quite tough on the fingers, and difficult to deal with the cord ends at the start and finish even after I melted/sealed them with a soldering iron. But the result’s quite cute… as long as you don’t look inside 😉


Buttonhole stitch - worked round and round a real limpet shell, starting at the top and increasing to match its shape (so why did it end up so steep?), in Crofter DK knitting yarn. A stiffer yarn might give a better result, but would be harder to stitch.


What else could I do? Well it’d be easy to crochet a cone, but not very interesting… knitting likewise. Felting might work, especially at a large scale… bigger forms generally might be worth exploring, as vessels perhaps.

But for now I’m moving on. Next time – surface designs or patterns inspired by multiple limpet shells.

Wednesday, 6 December 2017

Limpets part 2

 
Now, I’ve had a good play with broken limpets but what can I do with whole shells?

I thought about adding decorative bands or toppings, but… well, they wouldn’t be integrated in any way, just superficial. And there’s so little space, not much scope anyway. So, no. Even I draw the line at making limpet party hats!
 

Starting by exploring the surface texture, I covered a shell with aluminium foil, smoothing it well into the ridged pattern. Black acrylic paint was worked into all the texture and then rubbed off so it just remained in the crevices. Not textile, but quite effective.

Next, to investigate the shape, I covered a limpet with soluble paper, wetting it to make a pulp I could press into the texture. When dry I cut and peeled it off, and turned it inside out to see the textured side. A rubbing of Goldfinger paste brought out the pattern.   

Limpet shells aren’t round – they’re wonky cones. Now I’ve got a useful template, so let’s move on from using actual shells to recreating them. Well, not necessarily ones that’d blend in on the sea shore – I want to have fun with the basic cone shape in different colours and patterns.

Sticking with paper for a while… simple hand embroidery plus needle perforations on Somerset paper.
… and then I liked the perforation effect so much I did some more on dyed and waxed paper (the things you hoard from City & Guild days!). I ran the unthreaded Bernina around it, scratched lines with a needle, and used a Japanese screw punch. The waxing emphasises the marks, going pale around holes. 

 On to fabric, still worked flat then joined to form a cone, some gentle hand embroidery on felt (stabilised with Vilene) The purple one is detached chain, French knots and straight stitches in stranded cotton. The blue one is free cross stitch in a fine, shaded pearl cotton.
 
OK, bring on the Bernina! At last… back to free machining. Fine Lutradur (30) in a hoop, embroidered with subtle bands of off-white straight and zigzag/satin stitch. I used a soldering iron to burn out the shapes and seal the edges before hand stitching the seams to make them 3D. I love that the fabric is almost invisible, and the shells are so delicate.            
 
A couple of jazzier ones next, hard to believe there’s still white Lutradur under the colourful free machine embroidery. I could zap it away with a heat gun, but then I’d have to make sure the stitching interlinked; this way it can be more delicate and free.

But now I’ve thought of the heat gun… A quick one with random green and orange FME on green Kunin felt, zapped to make it lacy then seamed to make a cone.

Right, enough construction – for my next trick, it’s 3D limpet (-ish things!) without seams. Hopefully…

Saturday, 14 October 2017

Limpets

 
Right in front of my studio there’s a ready supply of limpet shells, and I’m always wondering what I could do with them.
 

I’d seen Alice Fox’s stitched limpets  – she takes ones with the top of the cone broken off, drills holes around the aperture, and “patches” the gap with flat needle weaving in off-white thread.
 
Intriguing… so I drilled one of my own and had a go. To make it different I added colour and texture - shaded indigo linen thread (from Stef Francis) and ribbed spider’s web stitch. If you’re going to try it, remember you’ll need an odd number of spokes for simple weaving, but an even number for ribbed spider’s web.
 
I wasn’t all that keen on drilling though… it seems, I don’t know, unnatural? A strange thing to say when I’m adding stitch to limpet shells, but that’s how it feels to me. Also it’s not a technique you could just play with spontaneously on holiday, say. So what could I do with these holey shells without the need to damage them further?
They could be completely wrapped with thread, ribbon or fabric. But I’d rather see some of the original shell. So let’s try just enough to make a base to decorate.
 
I used red shaded cotton from Oliver Twists, wrapped at intervals through the hole then woven over that “warp”  a few times. A bit clumsy perhaps, maybe a finer thread would look better, but I didn’t doing enjoy it so I’ll leave it there.
 
 
This next one was wrapped through the hole as before, but with a natural pearl cotton to tone in with the shell. Then I stitched raised chain band on these bars, using no. 8 pearl cotton (Hellebore, House of Embroidery). There’s nowhere to get rid of the ends on this one so I made a “feature” of them – i.e. just tied them in a knot on the front! I suppose if this was going to hang as a pendant or something these ends could form the loop. I just love raised chain band, any excuse. I might try this again with more bars, more rows of stitching – if I can find just the right shell.
 
These could make hanging ornaments, maybe a few strung together vertically or along a string as a garland? I can imagine trying that on a wet day by the seaside…

The tricky bit is fastening the thread on and off. I knotted the ends inside and threaded the ends through a few of the “stitches”, but tacky glue or masking tape would do – I won’t tell if you don’t. 😉  Best to allow plenty of thread to minimise the problem, no extra fastening on and off and hiding thread ends. Or make a feature of knots/tails on the front, or use as a loop for hanging.

Another approach is to fill the hole, with texture or protrusions.   


French knots embroidered on felt with variegated pearl cotton, made to fill the shell’s hole.

Loops of pearl cotton 8 (Hellebore again), on purple hand dyed felt, glued inside the holey shell with Tacky Glue. I left them uncut but a denser cut pile is another option.
 
 
A fringe free machined on soluble fabric with variegated pastel thread. I worked it round a small circle of white felt and after dissolving I stuffed it in the limpet ring and held it in place with glue inside.
Beaded tentacles or stalks made entirely by free machine embroidery on soluble fabric with a deep red velvet centre.
 
Finally I moved on to stitching limpet rings onto fabric.
It was soon apparent that I needed a firm base or it would distort. So I used thick wool (an old blanket I felted and indigo dyed) backed with pelmet Vilene. I stitched three rings down, just big “spokes” all round from the outside to the inside. Then I covered them by weaving round and round in ribbed spiders web (as A) using subtly variegated linen threads (from a long defunct supplier). To integrate these into the background I added a couple of lines of running stitch with light indigo pearl cotton.
 
I’m pleased with these, the embroidery seems to suit them, it’s quite natural and shell-like.
 
So, that was fun, and maybe some of the ideas can be taken forward… but it’s all broken shells, surely I can do something with intact ones? Without resorting to drilling holes, or gluing things to the surface. Watch this space…
 

Sunday, 10 July 2016

Samples 2016: Week 26, Flow/Ocean


Decided to interpret this one as water flow around obstacles. So I started by embellishing hand-dyed (by me! once upon a time) felt "stones" onto Kunin felt. Then I found a lovely hand dyed (by Oliver Twists) fine cotton for the running stitch. It might've worked better with more planning, but... tick.


Thursday, 7 July 2016

Samples 2016: Week 25, Calm/Ochres


Ooh I'm slipping behind... these simple samples are the only stitch I'm managing at the moment and even those are a struggle. Moving house is a full time job!

So for "calm" I settled on soothing rhythmic darning, with stranded cottons on hessian. 

Friday, 13 May 2016

Samples 2016: Week 19, Topography/Indigo

I love indigo - the magical transformation of the dyeing process as well as the colour itself. So I've got plenty of threads and fabric that I've indigo-dyed myself in the back garden.

Used together, the effect is too subtle really - there are several different threads here but you can hardly tell. On old wool blanket that I felted in the washing machine before dyeing.

"Topography" suggested contours to me, so I just doodled in running stitch along those lines (!).

Monday, 14 March 2016

Samples 2016: Week 10, Crunchy/Multicolour

"Crunchy"? Not sure what I had in mind when I added that to my list of themes! But I decided to interpret it as highly textural.

I started by knitting a fancy multi-coloured yarn, with lots of dangles, in garter stitch. Then I used to the embellisher to attach it to a felt backing.

No French knots this time - I chose Sorbello stitch for my chunky texture, in thick yarns and cords.
  

Sunday, 17 January 2016

Samples 2016: Week 2, Wavy/Black and White

I like the boldness of this one. Starting with black felt, I used the embellisher to apply strips of felt and thick yarns, then added simple machine and hand stitching to get a variety of lines.

It's the felt strips that give it impact, I think - pleased with that effect.  

Monday, 14 December 2015

Samples 2015: Week 49, Lips

Blanket stitch in stranded cotton on hand dyed cotton over felt

Source picture
From this article in the Saturday Guardian 05/12/15:
 
“How Jane Austen’s Emma changed the face of fiction. The story of a self-deluded heroine in a small village, Jane Austen’s Emma hardly seems revolutionary. But, 200 years after it was first published, John Mullan argues that it belongs alongside the works of Flaubert, Joyce and Woolf as one of the great experimental novels.”

Illustration by Susie Hogarth.
Sample design
Not my kind of subject (I was desperate!) – but the lips looked very blanket stitch.

Wednesday, 14 October 2015

Samples 2015: Week 39, Data Centre Emissions

Machined satin stitch framework on black cotton. Hand stitched loops of bright perle cotton.

Source picture
From this article in the Saturday Guardian 26/09/15:
“How viral cat videos are warming the planet. Datacentre web servers, such as those used by Google and Facebook, to blame for 2% of greenhouse gas emissions – about the same as air travel.”
Inside Google’s data centre in Mayes County, Oklahoma. The firm’s carbon footprint was equivalent to more than 1.7m tonnes of carbon dioxide in 2013. Photograph: Google/Rex
Sample design
Not the most obvious subject for embroidery! But the contrast of bright loopy wires against a rigid grid structure seemed ideal for combining auto machine stitching with free hand stitch.   

Wednesday, 30 September 2015

Samples 2015: Week 38, Tridoku

 
Coloured felt squares applied to white felt using the embellisher. Each colour then hand stitched with a slightly darker shade of stranded cotton.

Source picture
From this article in the Saturday Guardian 19/09/15:
“Nested fish and golden triangles: adult colouring and the beauty of maths. These mathematical patterns, by Alex Bellos and illustrator Edmund Harriss, are intended to engage the brain as well as provide a moment of stress-free satisfaction.”
Alex Bellos and Edmund Harriss
Sample design
This week I really fancied some simple colourful hand stitching so I pinched a small section of this image. Felt is so lovely to stitch on! 

Saturday, 19 September 2015

Samples 2015: Week 35, Harebells


Quick hand stitch, on pale green bandage scrim over felt. The flowers are teased tufts of crewel wool.

Source picture
From this article in the Saturday Guardian 29/08/15:
"Harebells at Bosley Cloud, Cheshire. As folklore has it, witches used juices squeezed from the flowers to turn themselves into hares; the Victorians believed fairies slept in the bells.”

Hare bells (Campanula rotundifolia): frail flowers flickering on wire-thin stems. Photograph: Gareth McCormack
Sample design
Flowers are an easy option, so I felt obliged not to be too realistic. And I wanted a bit of hand stitch to take on holiday, which cut down the options (though unexpectedly summery weather meant I didn’t actually touch it while away!).

So I chose to ignore the delicacy of the bells and went for quick and messy splashes of blue wool.

Sunday, 2 August 2015

Samples 2015: Week 30, “Olive ebola”

Running stitch in doubled fine wool on a piece of birch bark.
 
Source picture
“Olive oil prices surge due to drought and disease in Spain and Italy. Producers say this year’s harvests are worst they have seen, as consumer demand begins to outstrip supply.”
Red crosses painted on olive trees that need to be cut down to contain an outbreak of ‘olive ebola’ in Puglia, southern Italy. Photograph: Max Frigione/AP

Sample design
I’ve never tried stitching on real bark, so this was my chance! Even I wasn't going to try this with the Bernina though, it had to be hand stitch. All I could find was birch, and it was a bit tricky – both tough and brittle. The little scar marks pop right out if you try and push a needle through so I had to stitch between those. A bit of fun but once is probably enough.