December samples

It's December! The last four weeks of this year's project. So I decided to make them all a bit... seasonal. A bit of a challenge for  me, as I'm not mad about Christmas; I'm not about to do Santas and snowmen etc. For a bit of extra "spice", or incentive, each one had to use dissolvable fabric.

 

Each sample is free of background fabric, but shown against plain fabric or card for the photos.

 

2018/Week 49, Snowflake

This is a good start, everyone likes a snowflake and they're wintry, not Christmassy, right?!

 

I drew a design onto Solufleece with a vanishing marker and free machine embroidered it in mostly straight stitch plus a little narrow zigzag. I dissolved and pinned it out very carefully, and it seemed good... until I realised the pure white was marred by turquoise "vanishing" ink! So disappointing. I had to wet and rub it thoroughly, then pin it out all over again. Worth persisting though.

I can never resist the temptation to play with shadows...

It measures about 12cm point to point.

2018/50, Poinsettia

It's hard to remember that these spectacular (garish?!) plants are showing off brightly coloured leaves, not flowers. I wanted to create a simple, stylised version and stick to my rule of using soluble fabric. I didn't fancy just plain red, solid stitching... the solution was to use a sandwich of assorted thread scraps on AquaBond (sticky soluble) as the base.

I free machined the leaf outlines and veins, then cut them out before dissolving. They were assembled on a small disc of felt with hand stitch and finished off with a few chunky French knots in the centre.

Quite pleased, but it's a bit flat - perhaps I should've wired the edges. It measures 10cm across.     

2018/51,  Christmas Tree
OK, there's no avoiding Christmas this week! A decorated tree on soluble fabric seemed an interesting exercise.

I thought I'd try two or three layers of branches - wired this time!

A few fancy little Indian sequins were stitched in as I went along. And in the free space I had a few goes at little red buckets and stars for the top.

After dissolving I decide two layers worked best, and hand stitched them together. My favourite bucket and star were added too.

This is about 10cm tall. And looks a lot nicer in real life than my murky day photo!

2018/52, Christmas Detritus
The main event's over, all that's left is the mess! All that pretty wrapping paper, ribbons, cracker hats etc, crumpled up and forgotten... what can I do with it? 

I arranged satsuma netting, scraps of gift wrap, foil from chocolate coins, cracker hats and snaps, ribbon etc. on AquaBond and covered with thin clear dissolvable film. NO glitter mind, even my put-upon Bernina might object to that! Wide zigzag freely worked all over in red and green held it together.

From this I cut out rounded shapes, and stuck them onto more soluble film. I free machined spirals to fill the shapes, and linked them all.

There we are. About 10-11cm across. I could perhaps say it's all about waste spiralling out of control? But really it's just an abstract doodle.       

November samples

2018/Week 44, Hairy Loch
The reeds in this loch above Leverburgh on Harris have always appealed to me. Out of context they look like fine scratch marks on metal.

Thinking machine stitch would be too clumsy, I hand stitched a little section on silvery satin fabric. Not quite the effect I'd have liked but as much as I had patience for!

18/45 White Line
Once you start looking, there's inspiration everywhere... this was a badly eroded white line at the side of the road.

I free machined a section on Lutradur 70 over black cotton fabric, using a fine white cotton thread (Madeira Tanne 50). Then I zapped it with a heat gun. The unstitched areas vanish altogether.

18/46 Map Lichen
The last of my Harris inspirations, though this lichen grows locally on Skye too. Rhizocarpon geographicum is called map lichen because it looks like a map in an atlas, or an aerial view of a patchwork of fields.

I free machined my piece on Solufleece, filling the areas with different colours and patterns without worrying about realism. Some are dense and solid, others open and lacy. The challenge as always is linking everything together so it remains whole when the Solufleece is dissolved away! Only stitched thread is left, no fabric at all in this piece.

18/47 Full Moon
Binoculars gave a wonderful view of the scars and craters on a spectacular full moon this week.
I embroidered a circle completely filled with little star patterns to resemble craters.

The thread was shaded pale grey, though that doesn't really show up in the photo. I was disappointed that the white guideline made with a fine SewLine pencil wouldn't quite go away... lesson learned.  

18/48 Crocheted Blanket
Just had to commemorate this... I finally finished the blanket I've been crocheting on and off for 18 months or so! I never meant to make a blanket, didn't need one, I just started playing with yarn left over from a couple of cushion covers. Then I liked the hexagons so much I just kept going, and, well, we haven't got a single bed in the house so it had to fit a double to be any use at all...

So here it is - 425 hexagons, each in six colours so that was 5100 yarn ends to darn in, groan. Pretty, though.

And here's my stitched sample based on the hexagonal motif.

Free machine embroidery on Solufleece, of course. I domed the "popcorn" stitches by stitching round and round. 

Look, no fabric!

 

Now, what to do with all those yarn ends? Of course I saved them, wouldn't you?!

October Samples

2018/Week 40, Hedgerow Berries



Another bit created on my Harris holiday. With no sewing machine, I challenged myself to try hedgerow berries again but this time in knitting! I'm not the greatest knitter, but I like to experiment now and then.

I thought felted knitting would suit this, so I searched for pure wool to felt in the washer. I found two shades of green Shetland 4ply for the base, and knitted these together on 4mm needles. In a background of stocking stitch I randomly placed bobbles using a red/pink/orange Twilleys Freedom. (Bobble = k in front, back and front again of 1 st, turn, p3, turn, k3, turn, p3, turn, sl 1 k2tog, psso.)

Once home again I washed it at 60C and it felted pretty well! 

18/41 Car park
My Harris/Lewis holiday photos are full of inspiration for textiles. One of my favourites was this car park, with that metal mesh that's supposed to reinforce and protect the grass. There wasn't much grass left, but the plants looked wonderful in their hexagonal cells.

Back home I hand stitched the wire, used the embellisher to create a mossy effect, and free-machined stylised plants.

 

18/42 Lewisian gneiss
The ancient bedrock of Lewis is gneiss, banded with pink feldspar. The standing stones of Callanish include some beautiful examples. 

Monochrome shows the drama of the stones... but getting in close shows the subtle patterns and colours of the rocks.

This inspired a delicate lacy sample, free-machined on Solufleece. There's no fabric in this, just stitched thread - mostly Rayon 40 with just a little pinky metallic (which hardly shows in the photo).



18/43 Carloway broch 

I've seen a few of these Iron Age towers around the highlands and islands, some in better repair than others. The stonework always seems to follow the same pattern: the gaps between large blocks are filled with stacks and bands of small ones. Now I think about it, our garden wall is just the same!  

 

I used this as an excuse for a bit of wet felting. I'm trying to cure myself of the idea that felting is a messy, time-consuming business that needs a whole day set aside and plastic sheets everywhere. My felt jewellery course in August showed me I can dabble quite spontaneously at my desk. So I made a light grey merino base and decorated the top with bits of darker grey, recycled pink Cheviot, and white bamboo fibres.

 

I backed it with thin wadding, and my design on Solufleece, then free machined the block outlines with charcoal thread.   

     

That's it for October, but I haven't finished with my holiday snaps yet!

 

September samples

18/36 Purple flowers

 

Three purple-shaded flowers together caught my eye recently – devil’s bit scabious with knapweed and ling heather. Shying away from precision and detail (for once!) I got out the Embellisher and needled hand dyed green and lilac scrims through green felt.  Tiny clumps and tufts of wool fibres were added with a hand held felting needle. Without even injuring myself!

18/37 Seaweed

Have you ever really looked at seaweeds? They're fascinating, the range of shapes and colours! So I did a few little seaweed experiments using free machine stitching on Solufleece. 

The feathery ones are easy enough... bladder wrack, not so much. For the air sacs I stitched round and round (and round), distorting the fabric to make little raised bubbles. These aren’t solid, they’re hollow. You can get more height working without a hoop, but I only wanted tiny ones. The end results are a little messy, but they look alright as a group; I might take these further.

18/38 Hedgerow berries

This little piece started with a mix of yarns arranged on sticky soluble film (AquaBond). I free machined all over this base with green to link everything and fill it in a bit, and added a few blocks of satin stitch in shaded green for a leafy effect.

For the berries, I had in mind rowan, rose hips and blackberries. I machined clusters and individual dots using straight stitch in those colours. Then to make the berries stand out more I added a little hand stitching, mostly French knots (there always has to be French knots!).

I was quite pleased with this one after dissolving, maybe I’ll do more!

18/39 Seed heads

On holiday (Harris, since you ask - very nice thank you!) without my trusty Bernina, I had to resort to hand stitching. But nothing as normal as fabric – I used Somerset paper.

For each seed head I embroidered “long tailed detached chain stitch” (phew!) into and around a small punched hole. The thread was a lovely space dyed fine cotton from Oliver Twists. And yes, I did take my Japanese screw punch and a cutting mat on holiday… wouldn't you?! Well, you have to have some rainy day entertainments in the Outer Hebrides!

 

I love the crisp effect of stitch on paper, the embroidery really stands out.

August Samples

18/31 Chain stitch on soluble fabric  (that's 2018, week 31 by the way!)
A technique geek one this time. Not many people seem to play with hand embroidery on dissolvable film, but I can't resist. It's quite challenging... try it and you'll see!

I worked rows of chain stitch in grey, blue and turquoise pearl cotton, adjacent but not linked. Then to hold them together I threaded pink-mauve through the straight stitches that appear on the back of the fabric when you stitch chains.

Carefully dissolved, and voila! A fabric made of chain stitch embroidery. So what if it'd be quicker to knit, this is something different. But which side is best? The back looks like this:

 

18/32 Pattern Stitch fabric

Still in the mood for creating "fabric" from just stitches on dissolvable film, this time I went with machine embroidery. But built-in, automatic embroidery patterns, not free machining.

 

Thinking of the sea (it's right in front of my desk!) I chose a curled, wavy pattern:

I stitched three layers of this pattern on Romeo, working from dark at the bottom to light at the top. By the third layer, the Bernina had sussed that I wasn't using its pretty patterns as intended and started protesting by breaking the thread, but I pushed it on - I am very cruel to that machine.

In the end it was quite successful. I deliberately (honest) didn't align the stitches of each row, but it's all stayed together well and the curly pattern shows in places.

   

18/33 Gannet eye

I love watching gannets diving for fish in the bay - they're so spectacular! They look amazing close up too...

 Solid free machining (sometimes called thread painting) on calico.

 

18/34 Hand embroidery in air

There's such a craze for "hoop art" at the moment - embroidery displayed in the hoop used to make it. So of course I have to try it with dissolvable fabric!    

 

I decided I'd need a solid fabric edge, as tying a lacy confection onto the hoop would be messy at best. So I hooped up some felt with my dissolvable film and made sure all the stitching was attached to that.

I used tiny circles of felt for the flower centres - you do need somewhere to fasten threads on and off! They're linked with green running stitch, knotted at the junctions. Then simple straight stitch for the flower petals and French knots for the centres.     

 

18/35 Felt jewellery

For a change, I followed an online course in Wool Felt Jewellery throughout August. It was great fun, I can highly recommend Fiona Duthie's courses! 

 

We learned all sorts of techniques to make wet felted beads, cords and lace. I especially loved the cords, and made several bangles. I haven't done a lot of felting, so there was a lot to learn; I made sure I tried everything while there was someone to consult - Fiona and other students were very helpful.

 

My final experiment was this brooch idea, combining the felt I'd made with a bit of free machining on dissolvable fabric.        

It's a felt bead trapped in flat felt as it was made, then revealed as an "inclusion". I cut out the circle, then stitched it onto a larger circle of felt that I'd edged with cable stitch worked on Solufleece.

I focussed so much on learning all the new techniques that I ran out of time for making finished pieces. But I still want to make myself a cord necklace, with slider beads and inclusions.

It was wonderful to find I could make small felt pieces at my desk without getting water everywhere. Now I know that I'll definitely do more wet felting to combine with my stitching.
  

June Samples

18/23 Dragonfly wing
At RSPB Ham Wall (Somerset!) the other week I was astonished by the clouds of thousands upon thousands of dragonflies and damselflies, rising from the plants on either side of the broad path we walked. Mostly Four-spotted Chasers and Common Blue damselflies, I think.

Inspiring! But having done a dragonfly piece a few years ago, this one:

...I didn’t want to do anything too similar. So for variety, I based my sample on the detail of a dragonfly wing.

I used Solufleece reinforced with a bit of Aquabond on the back. Dark turquoise for the bolder lines, light turquoise with a multicoloured metallic thread on the bobbin for the fine network, giving just a hint of sparkle. A wired edge holds the shape and allows 3D shaping to create shadows.

18/24 Dragonfly pattern
Dragonflies again, but this time a pared down, stylised design. Hand stitching with fine machine embroidery thread, on a background of turquoise mulberry silk paper glued to thin white card.

I wish I could stitch something like this on a floaty, sheer fabric! But there’d be no hiding place for thread ends and travelling stitches.

18/25 Wild flower verge
My walk from Harrapool to Broadford was ruined when the verges were mowed flat just as the wild flowers were at their peak. Masses of ox eye daisies, orchids, clovers and buttercups, all cut off in their prime before they had chance to set seed.

I made this little piece in memory of them. It’s three layers of free machine embroidery on dissolvable fabric.

And then I sent a photo of it to the council, who were getting the blame. They claimed Transport Scotland was responsible so I sent it to them. They said it was about road safety, but didn’t reply again when I pointed out that the flowers were beyond a wide pavement so that was nonsense. At least the picture got my messages noticed, giving me a chance to suggest they look at Plantlife’s guidance and delay the mowing in future.

18/26 Ripples 

I’m lucky enough to have my desk looking straight out onto a wonderful sea view - Broadford Bay. The ever-changing colours and moods of the water are mesmerising.

For this sample I decided to use one simple hand embroidery stitch in a range of sea colours. Partly because I wanted some simple, slow hand stitching to take on a trip. I decided on twisted chain stitch, which I thought looked suitably ripple-y.

The fabric is indigo-dyed open weave cotton, backed with navy felt. Embroidered with all sorts of space dyed, blended and plain threads, some mixed with metallic blending filament.

Of course I didn’t do a single stitch while I was away, and it took me ages to finish this once I got home! It wasn’t easy getting the twisted chains to lie nicely, but I quite like the effect in the end.

May Samples

18/18 Pizza

Every week I think, what’s caught my eye? What have I seen recently that’s a bit different? It doesn’t (quite!) always have to be nature…

A trip to the city, a rare meal out – pizza! Pizza Express Vegan Giardiniera to be precise. Artichokes, olives, mushrooms, red onion, vegan “mozzarella”.

So here’s a little piece inspired by (not meant to look too much like!) a pizza. It could possibly be a brooch?

18/19 Primrose lace

OK, so I’ve done several versions of primroses before… but they’re everywhere right now, I just have to play with them again!

For something a bit different, I tried an open, lacy piece – entirely in free machining on soluble fabric.

     

18/20 Whelk shell

This spiral design came from an unusually colourful whelk shell I found on the beach – looking down the whorls from the apex.

I used the Embellisher to make a background, first meshing together loose weave cotton and scrim then adding a rough spiral of white and purple wool fibres.

Then I just had fun with hand embroidery in various purple, yellow and cream threads – running, stem and chain stitches and some French knots.

18/21 Bluebells

I think bluebells are my favourite wildflowers... though I might waver when foxgloves and primroses are about. It’s not the individual plants but the effect of hundreds, thousands of them - that fabulous blue-purple carpet. One of the special treats of a UK spring!

So it was the density of flowers I wanted to capture with this little sample, and I decided the only way to get that was to overlay several layers of embroidery. 

I free machined three strips of stems/leaves and flowers on Aquasol, using Madeira Rayon 40, ranging from 3cm to 4.cm tall. After dissolving and drying I overcast the layers together at the base.

18/22 Cape Daisy

I love to photograph flowers really close up, the centres are often fascinating. This one is a Cape Daisy.

It led to a little sample combining machine and hand embroidery. I pencilled the outline on white cotton fabric, and coloured the centre yellow with fabric crayons. Then I free machined the petals using grey-purple for their outlines and variegated lilac filling.

In the centre I stitched French knots in dark purple perle 8 and golden yellow stranded cotton, with a few purple straight stitches added to fill gaps.